Servo reducer usually daily maintenance and cleaning work

Servo reducer usually daily maintenance and cleaning work：

1.Pay attention to the usual maintenance of the servo reducer. Do not use it only and do not maintain it. This is a taboo for the use of the servo reducer. How good the equipment is, if not maintained, the life expectancy must be reduced by at least one third. Therefore, the usual maintenance of the servo reducer is especially important. The maintenance of the servo reducer includes: the replacement of the lubricant, check whether the installation base, seals, transmission shafts, etc. are normal, and the maintenance of the main parts such as the shell. The planetary gearbox cleaning and protection machine uses the original oil and drainage system of the planetary gearbox and the filtered old oil to complete the cleaning of the gearbox, the rapid filtering of waste oil, and the filling of new oil. The working process does not change the hardware equipment. No cleaning agent is added to ensure the safe operation of the servo reducer and extend the service life.

2. Servo reducer cleaning, various impurities are mixed in the lubricant during the use of the reducer, so we must protect and clean the reducer during the normal use. The reducer washer is designed to clean the reducer. The internal cleaning things help us to protect the impurities in the reducer so that we can use the reducer very well.

3. After the reducer leaves the factory, a running-in period of about 200 hours is generally defined (the oil must be changed beyond the period), which is determined by the technical characteristics of the reducer in the early stage of operation. The running-in period is the main link to ensure the normal operation of the reducer, reduce the failure rate and extend its service life. But now some users ignore it because they lack the knowledge of the use of the reducer or because the allowable torque is not enough, or they want to get the benefits quickly and use the small machine.

4. This is the maintenance of the main parts described to us. Of course, in ordinary maintenance, it is not necessary to maintain these points. These are only the most important ones. Some are clean and maintain. Other parts are also in need of protection.